مشکلات ناشی از ورود چربی و روغن (FOG) به شبکه فاضلاب

مخازن چربی گیر

ورود فاضلاب های حاوی چربی و روغن به شبکه جمع آوری فاضلاب باعث رسوب ذرات چربی و روغن در دیواره لوله ها و اتصالات و بالتبع گرفتگی (Fouling) اتصالات می شود. از طرف دیگر در اکثر رستوران های بین شهری مستقیماً پساب آشپزخانه ها را به داخل چاه تخلیه می کنند. این امر باعث گرفتگی روزنه های دیواره چاه و در نتیجه کاهش قدرت جذب چاه می شود. بنابراین جداسازی و حذف ذرات چربی و روغن از پساب، قبل از ورود به شبکه فاضلاب امری ضروری می باشد.

استفاده از چربی گیر آشپزخانه ثقلی جهت حذف چربی از جریان فاضلاب

به منظور جداسازی ذرات چربی و روغن از فاضلاب آشپزخانه و رستوران ها می بایست قبل از اتصال این فاضلاب به شبکه اصلی و یا تخلیه به چاه از یک واحد چربی گیر (Grease Trap) بهره گرفت. استفاده از چربی گیر فایبرگلاس ثقلی ضمن سادگی کاربرد، هزینه بسیار کمتری را به همراه دارد. با توجه به اینکه چربی دارای وزن مخصوص کمتر از فاضلاب می باشد، در صورت ایجاد شرایط محیطی مناسب، چربی موجود در فاضلاب به راحتی به سطح فاضلاب آمده و می توان آن را از جریان فاضلاب حذف کرد. استفاده از چربی گیر فایبرگلاس این شرایط را برای فاضلاب آشپزخانه ها فراهم می کند و در صورت کاربری مناسب، قادر به حذف بیش از 98 درصد چربی موجود در جریان فاضلاب خواهد بود. استفاده از فایبرگلاس در ساخت چربی گیر علاوه بر سبکی، باعث استحکام بسیار بالا و طول عمر طولانی آن خواهد شد. یکی از وظایف چربی گیر فاضلاب رستوران و آشپزخانه، نگهداری پساب چرب و کاهش دمای آن است. با این عمل حلالیت چربی در داخل فاز آب کاهش پیدا کرده و به دلیل اختلاف دانسیته در سطح فاضلاب جمع می شود. عمده ترین وظیفه دیگر یک چربی گیر رستوران و آشپزخانه جداسازی مواد جامد و پسماند های غذایی موجود در فاضلاب می باشد. چربی گیر فاضلاب معمولا در خارج از آشپزخانه و در داخل زمین نصب می شود تا اجازه جریان ثقلی به فاضلاب چرب داده شود. انتهای لوله خروجی چربی گیر در داخل فاضلاب شناور است تا باعث خروج پساب چربی گیری شده شود .

Login wastewater containing oils and fats and oils to the sewage collection network causes fatty deposits in the walls of pipes and consequently Eclipse (Fouling) is fitting. On the other hand, in most restaurant kitchens urban waste water directly into the drain hole. This leads to the clogging of pores in the walls of the well and the well is reduced absorption. Therefore, isolation and elimination of fat particles and oil from wastewater before it enters the sewage system is necessary.
Use gravity to remove fat from the fat-consuming kitchen waste

Simply use the gravity of fiberglass mat fat, less associated costs. Since oil has a specific gravity less than the waste water, if appropriate environmental conditions, the level of fat in sewage wastewater and it can be easily removed from the wastewater stream. The use of fiberglass mat fat provides the conditions for kitchen waste and, if appropriate username able to remove more than 98 percent fat in the wastewater stream. The use of fiberglass in the manufacture of fat retention in addition to its low weight, high strength and long life it will cause. One of the tasks involved fats sewer cleaning, kitchen, maintenance of wastewater fat and reduce its temperature. By doing this fat solubility in water phase decreased due to density differences in the level of accumulated waste. The main task of separating solids, a fat-consuming cleaning, kitchen and food waste in the sewage. Waste oil is stuck out of the kitchen and into the ground to allow gravity flow of sewage to be fat. Fat outlet end of the tube is stuck inside the submersible sewage to the wastewater out of the fat.

 Domestic and industrial water purifier filter, oil storage tanks hard Gyr, Gyr, fat solvent retention pond pool Gyr, fat fat fat retention ponds Gyr, kitchen, Dtayl Gyr, fat fat paper stuck Gyr, kitchen equipment fat, fat-consuming treatment, Homepage consuming fat, fat-consuming sewage, industrial waste water consuming fat, fat is stuck, stuck fat, water treatment plants